높이 600 x 폭 370 x 깊이 317mm, 무게 18Kg인 ePS12는 15mm 발트 자작나무 합판에서 밀폐형 음향 디자인으로 제작된 사다리꼴 캐비닛에 하이 익스커션 12인치 LF 드라이버와 1.7인치 보이스 코일 HF 드라이버를 결합했다. 60Hz ~ 20kHz의 주파수 범위에서 133dB의 피크 SPL을 달성하는 ePS12는 회전 가능한 비대칭 혼, 캐비닛 상단, 하단 및 후면의 편리한 리깅포인트 및 IP 방수커버가 있는 피치 나사로 만든 단자 블록 두 쌍의 In/Out 커넥터를 가지고 있다.

Key Features

▪ High power (133 dB peak) point source loudspeaker for fixed installation

▪ Lightweight (18kg / 40lbs) design

▪ Robust 15 mm Birch plywood enclosure

▪ NEXO’s Asymmetrical Dispersion Constant Directivity horn design (”PS” Horn), rotatable

▪ IP55 protection level

▪ Comprehensive range of accessories for deploying in a wide variety of fixed installation applications

▪ Black finish with custom RAL colours available

Specifications

Frequency Response @-6 dB 60 Hz to 20 kHz

Sensitivity 1W@1m 103 dB SPL Nominal

Peak SPL@1m 133 dB

Vertical Dispersion +25°/-30°

Horizontal Dispersion 50° to 100° asymmetrical

Crossover Frequency 60 Hz, 85 Hz, 120 Hz

Nominal Impedance 8 Ω

Recommended Power 600 to 950 Watts / 8 Ohms

Features

Number of ways 2 way passive

LF Component 12” 8 Ohms long excursion neodymium driver

HF Component 1.7” diaphragm 8 Ohms HF driver on an Asymmetrical Dispersion (“PS”) horn

Connectors 2 pairs (In/Out) of 7.62 mm pitch screw terminal blocks (+/- poles)

Compatible cables section Cables from 1.5 mm² to 3.3 mm² (AWG 12 to 15) copper section

Compatible cables outside diameter Cable with maximum outside diameter of 11 mm

Rigging points 3x M6 - 70 mm pitch rigging points (back) + 2x extra M6 and 1x M10 (top/bot)

Material 15 mm thick birch plywood body and galvanized grill

Finish Black structural paint (RAL9005 or Custom RAL upon request)

Front Finish UV & Fire resistant acoustic fabric

Height x Width x Depth 600mm x 370mm x 317mm

Weight: Net 18 kg

Operating temperature range 0°C - 40 °C (32° F - 104° F)

Storage temperature range -20 °C - 60 °C (-4 ° F - 140° F)

IP Rating IP55

System Operation

Recommended powering solution NXAMP4x1mk2 Powered TDcontroller: 1 x ePS12 per channel

Optional powering solutions DTDcontroller + DTDAMP4x0.7 : 1 x ePS12 per bridged channel

DTDcontroller + DTDAMP4x1.3 : Up to 2 x ePS12 per channel

NXAMP4x2mk2 Powered TDcontroller: Up to 4 x ePS12 per channel

NXAMP4x4mk2 Powered TDcontroller: Up to 4 x ePS12 per channel